Bed Assembly: A step-by-step guide

Step 2: Attach the First Rail to Headboard

• Work on one rail at a time
• Have one person work on the brackets, while the other holds the rail in position, roughly perpendicular to the headboard.
• Connect bracket and install one bolt finger-tight (snug but not fully tightened)
  

Step 3: Connect First Rail to Base Board

• The person holding the rail can now lower the rail to roughly level position, while the other gets the baseboard into position. 
• Tip: If the fit is tight, gently tap the base board with your palm to close any gaps
• Install one bolt finger-tight
• The bed frame will now stand independently

Step 4: Install the Second Rail

• Both people lift the second rail, each holding one end
• Work together to align and lock both brackets into place
• Install one bolt finger-tight at each connection point (headboard and baseboard)

Step 5: Secure All Connections

• Important: Thread all remaining bolts partially before tightening any completely
• This prevents binding if one bolt is overtightened first
• Once all bolts are started, tighten firmly but avoid stripping threads

Step 6: Final Assembly

• Install the centre support beam
• Place slats evenly across the frame
• Add your mattress

-

You're Done!

Your bed is now ready for use. Enjoy your first night's sleep!

Need Help?

Questions about assembly or missing parts? Contact our support team - we're here to help make your setup seamless.